6" Power Drawer Actual product may differ slightly from image shown EACH UNIT SOLD SEPERATELY Power Drawer Model #: 245-1997/245-2001/245-2003 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols.......................................................................... 2 Safety Instructions...................................................................... 3 Parts List.................................................................................... 4 Assembly and Operation............................................................ 5 Maintenance and Safety.............................................................
SAFETY SYMBOLS Model #:_________________________________ CAUTION: 1. Read and follow all safety and assembly instructions before using this product for the first time. 2. Fill in the following information and retain the manual for future reference: Place of purchase:________________________ Date of purchase:________________________ Receipt # of purchase:____________________ Do not step on the drawer. Do not allow children near the unit. Lock drawer before moving the unit. Do not lift unit by yourself.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures.
PARTS LIST For service regarding parts, assembly or warranty information, please call: 1-800-459-4409. The keys are taped inside the drawer.
ASSEMBLY AND OPERATION NECESSARY TOOLS REQUIRED FOR ASSEMBLY • 10 mm socket • Extension ratchet HANG POWER DRAWER Hang the power drawer on your tool cabinet. • Phillips screwdriver INSTALL HANGER The hanger can be mounted on either side of a tool cabinet. If necessary, remove the side handles from the tool cabinet. To install the hanger, position it over the holes in the tool cabinet and attach using four M6 x 16 counter sink screws. Tighten securely.
ASSEMBLY AND OPERATION RAISE AND RELEASE DRAWER FRONT This unit is equipped with a raise and release drawer front. To open, lift up on the drawer front while pulling towards you. To close, shut the drawer firmly until the latch engages. If the drawer does not stay closed, the drawer contents may be the obstruction, or the hook may be bent or it may rub against the drawer slides. To fix this problem, lightly bend the hook until the drawer engages in the slide.
MAINTENANCE AND SAFETY MAINTENANCE Periodically clean the drawer fronts, trim, and other surfaces with mild detergent and water. Lubricate the slides (twice a year) with a product like WD40 or other quality lubricant. This is especially important in low temperatures, which can cause the bearing to become stiff. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY WARNING: Close and lock the drawer before moving this product.
MAINTENANCE AND SAFETY NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
NOTES Page 9
16" Power Drawer LIMITED LIFETIME WARRANTY MASTERFORCE® Power Drawers have been manufactured to the highest standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at our discretion.
©2020 Menard, Inc.
