Use And Care Manual

Page 16
ASSEMBLY AND OPERATION
Carefully separate the front and back
panels, allowing the side panels to unfold
completely.
NOTE: IF YOU ARE STACKING TWO
CABINETS, YOU NEED TO PICK ONE
CABINET TO BE ON THE TOP AND ONE
CABINET TO BE ON THE BOTTOM.
ASSEMBLE THE BOTTOM CABINET
FIRST. Start by turning the cabinet on its
top and attaching the bottom as shown
below.
TILT THE BOTTOM PANEL ONTO THE
BOTTOM OF THE CABINET.
INSERT THE LIP OF THE BOTTOM
PANEL INTO THE SLOT ON THE BACK
OF THE CABINET, MAKING SURE THAT
THE HOLES ALIGN.
Attach the bottom panel to the cabinet
using eleven M6x16 Phillips head bolts.
2-DOOR STACKING CABINET
Continue on the next page
Assembly is VERY EASY, however there are a few key steps that must be followed.
THESE KEY STEPS ARE HIGHLIGHTED IN BOLD CAPS. FOLLOW THESE TO EXPEDITE ASSEMBLY.