Use And Care Manual

Page 10
ASSEMBLY AND OPERATION
Attach the bottom panel to the cabinet
using eleven M6 x 16 Phillips head bolts.
Insert four shelf supports inside the cabinet
at the desired height.
Place the shelf on the shelf supports.
The cabinet weight capacity is determined
by the stability of the surface it is mounted to.
FOR BEST RESULTS, WALL CABINETS
SHOULD BE MOUNTED TO STUDS OR
OTHER SOLID SURFACES. Do not mount
to drywall as it will not support the required
weight and poses a danger if mounted
incorrectly.
Attach the mounting bracket to the wall at
the desired height using two M6 x 40 hex
tapping screws, making sure the bracket is
level.
Hang the wall cabinet on the mounting
bracket.
Fasten the wall cabinet to the wall with
a M6 x 65 hex tapping screw and washer.
The maximum shelf
capacity should be no more than 50 lbs
CAUTION: