Use And Care Manual

Page 16
INSTALLING & CLEANING CARTRIDGE FILTER
INSTALLING CARTRIDGE FILTER
1. Verify that the battery is disconnected
(Fig. 34).
Fig. 34
2. Remove power head and place in an upside
down position.
3. Install the cartridge filter over the filter cage,
securing it with the retainer nut. Do not
overtighten (Fig. 35).
Fig. 35
REMOVING & CLEANING CARTRIDGE
FILTER
1. Unscrew the retainer nut by turning counter
clockwise (Fig. 36).
Fig. 36
2. Carefully hold and pull the cartridge filter up
for removal.
3. Clean the cartridge filter by brushing or
rinsing off the debris (Fig. 37).
Fig. 37
4. Install cleaned or new filter as instructed in
steps 2 & 3 of INSTALLING CARTRIDGE
FILTER.
5. Wet filters should be removed and allowed
to air dry for 24 hours before installing onto
the filter cage.