6 Gallon Air Compressor 207-1508 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference. Toll Free Helpline: 1-888-899-0146 E-Mail: info@altonindustries.
TABLE OF CONTENTS SAFETY SYMBOLS Table Of Contents........................................................................................................................ Page 2 Safety Symbols ............................................................................................................................. Page 3 Safety Instructions ........................................................................................................................
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS WORK AREA SAFETY The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitutes for propper accident prevention measures.
SAFETY INSTRUCTIONS before using. Many accidents are caused by poorly maintained tools. 9. Use only accessories that are recommended for this tool. Accessories that may be suitable for one tool may become hazardous when used on another tool. ELECTRICAL SAFETY 1. Avoid body contact with grounded surfaces such as pipes,radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 2. Do not expose power tools to rain or wet conditions.
Important Information Tool Compatibility Chart 207-1508 This air compressor is ideal for a wide range of jobsite applications. The 6 gallon design provides optimum pressure. It features a 1.5 HP universal motor and oil-free pump. The procedures described in this manual are solely for this 6 gallon air compressor at a maximum pressure of 175 PSI. Compatible compressor and air tool - proper usage and operation Always ensure the use of appropriately matched air tools with your air compressor.
Operating Instructions Assembly Instructions Unpack the air compressor unit. Inspect the unit for damage. If the unit has been damaged, contact the retailer immediately. Check the air compressor’s identification label to ensure that you have purchased the intended model and that it has the required pressure rating for its intended use. Check Safety Valve Before starting compressor, pull the ring on the safety valve to make sure that the safety valve operates freely.
Maintenance Operating Instructions 4. Close the tank drain (1) . Plug-in the power cord(2) (FIG. G). FIG. I ITEM 3 FIG. G 2 2 Drain the tank 1 1 OFF ON 4 WARNING: 5. Set the power switch to the ON position and allow the tank pressure to build. Motor will stop when tank pressure reaches cut-out pressure(Fig H). FIG. H OFF Risk of serious eye injury from moisture and debris. Always wear ANSI Z87.1 safety goggles when opening tank drain.
Troubleshooting PROBLEM POSSIBLE CAUSE Troubleshooting SOLUTIONS PROBLEM POSSIBLE CAUSE The power cord is not plugged in. Plug the power cord into a grounded outlet. The power switch is in the O (OFF) position. Set the power switch to the ON position. The extension cord is the wrong wire gauge or is too long. Check extension cord information (page 6) for the proper wire gauge and cord length. The motor’s thermal overload protection has tripped.
Exploded View Parts List Item# Description Qty 1 J2996980526 Quick Coupler 2 2 J7105350774 Manifold 1 3 J0305340773 Pressure Regulator 1 4 J0022520037 Safety Valve 1 5 F5013701213 Pressure Gauge 2 6 Q087A968001 Pressure Gauge Cover 1 7 J0801100033 Bolt M5 1 8 JA265530414 Silencer 1 9 J8335360733 Transfer Tube 1 10 X3040350035 Rubber Pad 3 11 J2983450040 Washer 3 12 J0809760032 Bolt M8 3 13 D1015001206 Power Cord 1 J3262970629 Handle 1 J3262980630 H
NOTES 6 Gallon Air Compressor WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2021 Menard, Inc.
