Technical Specifications

Page 13
ELECTRIC BRAKE
The circular saw is equipped with an electric
brake. When the trigger switch is released,
the electric brake engages automatically to
quickly stop the blade rotation.
CUTTING WITH THE CIRCULAR
SAW (FIG. 10A, 10B & 10C)
To make the safest and best possible cut,
follow these helpful hints:
• Hold the saw firmly with both hands.
• Avoid placing your hand on the
workpiece while making a cut (FIG. 10A).
• Support the workpiece so that the cut
is always to the operator’s side and not
directly in line with the operator’s body.
• Support the workpiece near the cut.
• Clamp the workpiece securely so that
the workpiece will not move during the
cut (FIG. 10B).
• Always place the saw on the portion of
the workpiece that is supported, and
not on the “cut off” piece (FIG. 10C).
• Place the workpiece with the “good”
side down.
• Draw a guideline along the desired
cutting line before beginning the cut.
NOTICE: The “good” side of the
workpiece is the side where appearance
is important.
FIG. 10A
FIG. 10B
FIG. 10C
OPERATION