Installation Instructions

Customer Service:
1-888-229-2874
69MF15K-I_08/23/12
69MF15K
PEX Multi-Head Crimp Tool
How to use:
1
2 3
4
To remove and replace crimp heads:
1. Cut tubing end squarely.
Check for and remove any
burrs.
2. Slide crimp ring over end
of tubing. Insert tting into
end of tubing until it stops.
Position the crimp ring
1/8” to 1/4” from the end
of the tubing and over the
ribs of the tting.
3. Place the crimping end of
tool around the crimp ring
and press the handles
together.
4. Check for proper crimp
with the Go/ No-Go
gauge.
1. With the handles
fully open, press
side release spring
upward until the
hook is above the
jaw pin.
PEX Multi-Head Crimp Tool Kit
Eective Date: 4/26/10
Apollo product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Apollo Technical Service. Apollo reserves the right to change or modify product design, construction, specifications,
or materials without prior notice and without incurring any obligation to make such changes and modifications on Apollo products previously or subsequently sold.
1. With the handles fully
open, press side release
spring upward until the
hook is above the jaw pin
2. Slide jaw out of
position and remove
3. With the side release
spring pressed upward,
slide new jaw into place,
and release the spring
2. Slide jaw out of
position and
remove.
3. With the side
release spring
pressed upward,
slide new jaw into
place, and release
the spring.
1
PEX Multi-Head Crimp Tool Kit
Eective Date: 4/26/10
Apollo product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Apollo Technical Service. Apollo reserves the right to change or modify product design, construction, specifications,
or materials without prior notice and without incurring any obligation to make such changes and modifications on Apollo products previously or subsequently sold.
1. With the handles fully
open, press side release
spring upward until the
hook is above the jaw pin
2. Slide jaw out of
position and remove
3. With the side release
spring pressed upward,
slide new jaw into place,
and release the spring
2
PEX Multi-Head Crimp Tool Kit
Eective Date: 4/26/10
Apollo product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Apollo Technical Service. Apollo reserves the right to change or modify product design, construction, specifications,
or materials without prior notice and without incurring any obligation to make such changes and modifications on Apollo products previously or subsequently sold.
1. With the handles fully
open, press side release
spring upward until the
hook is above the jaw pin
2. Slide jaw out of
position and remove
3. With the side release
spring pressed upward,
slide new jaw into place,
and release the spring
3