Installation Instructions

ManualsBrandsMasterforce ManualsPower Tool AccessoriesMiter Saw Stand Handle Kit with GFCI

Miter Saw Handle

GFCI

[M/flSTEAF,iJRl:£4®

240-1673

l•Jd;MC

❖

l-iMMfi¼il

2016 Menard, Inc., Eau Claire, WI 54703

08/11/2016

/ACAUTION:]

Reduce The Risk Of Injury, User Must Read And

Understand Operator's Manual. Save These Instructions For Future Reference .

Summary of content (4 pages)

PAGE 1
FCI Miter Saw Handle & G ® 4 £ : l R J ,i F A E T S l [M/f 240-1673 l•Jd;MC❖l-iMMfi¼il Eau Claire, WI 54703 © 2016 Menard , Inc., 08/11/2016 er Must Read And e The Risk Of Injury, Us e. /ACAUTION:] To Reduc ns For Future Referenc l.
PAGE 2
SAVE THIS MANUAL Reference this manual for all safety warning s and precautions , operating and maintenance procedures, parts list and diagrams . Keep your invoice with this manual and write your invoice number on the inside of the front cover. Keep the manual and invoice in a safe, dry place for future reference . IA WARNING:I Be sure to read and understand all safety instructions in this manual , including all safety alert symbols such as "danger" , "warning", and "caution" before using this tool.
PAGE 3
NOTES TOOL USE AND CARE • Grounded tools must be plugged into an outlet, properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tool should electrically malfunction or break down , grounding provides a low resistance path to carry electricity away from the user.
PAGE 4
ATTACHING THE GFCI PARTS LIST SeeFigure2 1. Once the handle is attached to the miter saw stand , feed the GFCI through the middle of the Miter Saw Handle , It should fit snugly in the provided space. 2. Use existing instructions and safety warnings for the GFCI. NOTE : FOR YOUR SAFETY, PLEASE ENSURE YOU READ THESE INSTRUCTIONS CAREFULLY BEFORE USE, AND KEEP THESE INSTRUCTIONS IN THE WORK SPACE WHERE THE GFCI & MITER SAW HANDLE WILL BE USED.