Installation Instructions

ManualsBrandsMasterforce ManualsPower Tool AccessoriesOversized Tool Mount

[IVll;ISTERHJJiC£~

Universal Tool Mount Accessory

240-1672

OPERATOR'S MANUAL

LACAUTION: I To Reduce The Risk Of Injury, User Must Read And

Understand Operator's Manual. Save These Instructions For Future Reference .

For questions / comments, technical assistance or repair parts -

Please call toll free at: 1-800-255-7011 (M-F 8am - 6pm CST)

Summary of content (4 pages)

PAGE 1
Universal Tool Mount Accessory [IVll;ISTERHJJiC£~ 240-1672 OPERATOR'S MANUAL I LACAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator's Manual. Save These Instructions For Future Reference . © 2016 Menard , Inc.
PAGE 2
TABLE OF CONTENTS Save this Manual. ............................................................................. Page 2 [!JIIA518'4iiJliC£~ Overview .................... ....................................................................... Page 2 Safety Instructions ............................................................................ Page 2 Parts List...........................................................................................
PAGE 3
SAVE THIS MANUAL ASSEMBL V INSTRUCTIONS Required Tools : 13mm Box End Wrench (when mounting) 1. Carefully remove the contents of the box and place the materials on a flat surface (table, floor, etc .). 2. Attach the Mounting Brackets to two Rapid Clamp Tool Mounts (sold separately , 240-1659) using a ratchet with 3mm Box End Wrench to tighten the four carriage bolts (included) or other appropriate mounting hardware.
PAGE 4
SAFETY INSTRUCTIONS TOOL USE AND CARE WORK AREA SAFETY 1. Disconnect electrical plugs from the power source before making any tool adjustments to reduce the risk of inadvertent tool starts. Always work in a clean and well lit area. Avoid distractions by keeping bystanders, children, and visitors away while operating a tool. Keep floors dry and free of slippery materials that may invite accidents .