Blower 267-3209 OPERATOR’S MANUAL CAUTION: To Reduce the Risk of Injury, User Must Read and Understand the Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374 (M-F 8:30am-5:00pm EST).
TABLE OF CONTENTS Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY SYMBOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
SAFETY INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS 14. To reduce the risk of electric shock or damage to the charger and battery, use only the batteries and charger listed. WARNING: To reduce risk of fire, electric shock, or injury: Battery pack Charger 252-8003 252-8025 1. Know your power blower. Read the instruction manual carefully. Learn the blower’s applications and limitations, as well as the specific potential hazards related to this blower.
SAFETY INSTRUCTIONS 21. Always take care of your feet, children, or pets around you when removing the battery pack from blower. Never remove the battery pack when in a high position. Serious injury could result if the battery pack falls. 22. Do not use the blower if switch does not turn it on or off. A blower that cannot be controlled with the switch is dangerous and must be repaired. 23. Remove the battery pack from the blower before making any adjustments, changing accessories, or storing the blower.
SAFETY INSTRUCTIONS 41. Never place the blower on any surface, except a hard, clean surface when the engine is running. Gravel, sand, and other debris can be picked up by the air inlet and thrown at the operator or bystanders, causing possible serious injuries. 42. Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan this tool to someone else, also loan these instructions to them to prevent misuse of the product and possible injury.
OVERVIEW Main Handle Trigger-lock Lever Blower Tube SPECIFICATIONS Rated Voltage 20V d.c. Max Air Volume 400 CFM Max Air Speed 100 MPH Weight 4lb.10oz (2.
ASSEMBLY CONTENTS WARNING: If any part is broken or missing, DO NOT attach the battery pack or operate the tool until the broken or missing part is replaced. Failure to do so could result in possible serious injury. Cordless Blower, blower tube, and instruction manual. UNPACKING WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool.
ASSEMBLY TO DETACH BATTERY PACK (FIG. 1) 1. 2. Make sure that the variable-speed trigger switch is in the OFF position and the trigger lock is in the OFF position. Depress the battery-release button located on the battery pack to release the battery pack. 1. Align the arrows between the blower tube and the blower housing, and then insert the tube into the blower housing. 2. To remove the blower tube, just pull it straight out from the blower. FIG.
OPERATION 4. The trigger-lock lever can also be pulled back to start the blower without needing to first depress the variable-speed trigger switch. The blower runs at higher speeds as the lever is moved further back. • TO TURN THE BLOWER OFF • 1. If the trigger-lock lever is not engaged, release the variable-speed trigger switch to turn off the blower. 2. If the trigger-lock lever is engaged, move the trigger-lock lever forward to the unlocked position to turn off the blower. FIG.
MAINTENANCE WARNING: Always wear safety goggles or safety glasses with side shields during power tool operations, or when blowing dust. If the operation is dusty, also wear a dust mask. WARNING: Do not at any time let brake fluids, gasoline, petroleum-based products, penetrating oils, etc. come in contact with plastic parts. Chemicals can damage, weaken or destroy plastic, which may result in serious personal injury. MAINTENANCE The tool may be cleaned most effectively with compressed dry air.
NOTES Page 12
NOTES Page 13
Blower WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2020 Menard, Inc.
