Cordless Hedge Trimmer 267-1530 OPERATOR’S MANUAL CAUTION: To Reduce the Risk of Injury, User Must Read and Understand the Operator’s Manual. Save These Instructions For Future Reference. For questions / comments, technical assistance or repair parts – Please Call Toll Free: 1-866-917-4374 (M-F 8:30am-5:00pm EST).
TABLE OF CONTENTS Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview/Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAFETY SYMBOLS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. Symbol Name Designation / Explanation V Volts Voltage A Amps Current n0 No-load Speed Rotational speed at no load Strokes per Minute Stroke speed, at no load Direct Current Type of characteristic of current SPM � or d.c.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
SAFETY INSTRUCTIONS GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/ or serious injury. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. WORK AREA SAFETY 1.
SAFETY INSTRUCTIONS 5. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. 6. Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. 7. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.
SAFETY INSTRUCTIONS of injury. 6. Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 100 °C (212 °F) may cause explosion. 7. Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire. SERVICE 1.
SAFETY INSTRUCTIONS 6. Do not wash with a hose; avoid getting water in motor and electrical connections. 7. Do not incinerate the appliance even if it is severely damaged. The batteries can explode in a fire. –Lead from lead-based paints –Crystalline silica from bricks, cement, and other masonry products –Arsenic and chromium from chemicallytreated lumber DANGER: People with electronic devices, such as pacemakers, should consult their physician(s) before using this product.
OVERVIEW Front Switch Trigger Blades Guard Lock-off Button Blade Cover Rear Switch Trigger SPECIFICATIONS Rated Voltage 20 V d.c. No-load Speed 2600 SPM Cutting Blade Length 22 in. Cutting Width 9/16 in.
ASSEMBLY CONTENTS WARNING: If any part is broken or missing, DO NOT attach the battery pack or operate the tool until the broken or missing part is replaced. Failure to do so could result in possible serious injury. Cordless hedge trimmer and instruction manual. UNPACKING WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious injury. 1.
OPERATION TO ATTACH/DETACH BATTERY PACK (FIG. 1) TO REMOVE/INSTALL THE BLADE COVER (FIG. 2) TO ATTACH BATTERY PACK 1. Align the raised rib on the battery pack with the grooves on the bottom of the tool, then slide the battery pack onto the tool. 2. Ensure that the battery-release button on the battery pack snap into place and the battery pack is secured to the tool before beginning operation. FIG. 2 Blade Cover FIG.
OPERATION TO START/STOP THE HEDGE TRIMMER (FIG. 3) FIG. 3 Lock-off Button Front Switch Trigger TO STOP THE HEDGE TRIMMER Move the hedge trimmer away from the cutting area and release either of the two switch triggers to stop the hedge trimmer. WARNING: Always remove the battery pack from the hedge trimmer during work breaks and after finishing work. USING THE HEDGE TRIMMER WARNING: Rear Switch Trigger Before starting the hedge trimmer • Make sure that you have a secure and balanced footing.
OPERATION attempting to free the blade from the line or cord. Failure to heed this warning will result in serious personal injury or possible death. TOP CUTTING (FIG. 4A) FIG. 4a TIPS FOR BEST TRIMMING RESULTS • Before starting the hedge trimmer, maintain proper footing and balance and do not overreach. Wear safety goggles, nonskid footwear and rubber gloves. Hold the unit with both hands, with the cutting blade directed away from you. • Do not trim too much at one time.
MAINTENANCE WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: To avoid serious personal injury, always remove the battery pack from the product when cleaning or performing any maintenance. CLEANING • For safe and proper operation, always keep the tool and its ventilation slots clean. Always use only a soft, dry cloth or brush to remove debris from the air vents and cutting blade.
TROUBLESHOOTING PROBLEM Hedge trimmer dose not work. Excessive vibration or noise. POSSIBLE CAUSE SOLUTION The battery pack is not properly attached to the hedge trimmer. Attach the battery pack to the hedge trimmer. The battery pack is depleted. Charge the battery pack. The front and rear switch triggers are not depressed simultaneously. Press the lock-off button first and then press the front and rear switch triggers simultaneously. The blade is jammed.
NOTES Page 15
NOTES Page 16
NOTES Page 17
Cordless Hedge Trimmer WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCETM brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCETM brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2018 Menard, Inc.
