Assembly Instructions

Page 7
TO REVERSE
THE DOOR
The door is pre-installed with the hinge on
the left.
To install the door on the right, loosen the
screws on the hinge and remove the door
from the locker.
Turn the door upside down. Rotate the
locking bar so that the longer section is
on top and the shorter section is on the
bottom. Switch the tabs for the locking bar,
so that the top upper tab is near the top.
This is important to ensure that the lock is
secure.
Put the door into position and fasten the
screws on the hinge.
Install the hanger and connecting channel
on the left side of the locker.
ASSEMBLY AND OPERATION