Installation Instructions

Page 10
1. Use battery packs only with the
recommended charger.
2. Connect the charger to the power
supply.
3. Attach the battery pack to the charger
by aligning the raised ribs of the battery
pack with one of the slots in the charger.
Slide the battery pack onto the charger.
4. The charger will communicate with the
battery pack circuitry to evaluate the
condition of the battery pack.
5. During normal charging, the green LED
on the charger will flash continuously.
6. After charging is complete, the green
LED on the charger will be on and
the power indicator LED lights on the
battery will turn off. The power indicator
LED lights will not illuminate when the
power indicator button is pressed while
the battery pack is on the charger.
7. The battery pack will fully charge, but
will not overcharge, if left on the charger.
OPERATION
HOW TO CHARGE
THE BATTERY PACK (FIG. 1)
FIG. 1
A fully discharged battery pack will charge
about 40-120 minutes (depending on
battery type) in the optimum surrounding
temperature.
LED FUNCTIONS OF CHARGER (FIG. 2)
FIG. 2
LED INDICATOR BATTERY
PACK
RED
LED
GREEN
LED
ACTION
HI / LO TEMP.
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
Hot/Cold
battery
On Off Fast charge will begin
when battery returns
to 41°F(5°C)-and
104°F(40°C)
HI / LO TEMP.
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
Defective Flashing Off Battery pack or charger
is defective
HI / LO TEMP.
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
Charging Off Flashing Charging
HI / LO TEMP.
DEFECTIVE
BATTERY
BATTERY
CHARGING
BATTERY
FULL
Fully
charged
Off On Charging is complete