Product Manual

Page 4
KNOW THE TOOL
WARNING:
To reduce the risk
of injury, user must read the Operator’s
Manual. Read this Instruction Manual and
all of the labels affixed to the router table
carefully before operating this tool. Keep
this manual available for future reference.
IMPORTANT
This tool should only be serviced by a
qualified service technician.
GROUNDING INSTRUCTIONS
1. In the event of a malfunction or
breakdown, grounding provides a path
of least resistance for electric current to
reduce the risk of electric shock. This tool
is equipped with an electric cord having
an equipment grounding conductor and a
grounding plug. The plug must be plugged
into a matching outlet that is properly
installed and grounded in accordance with
all local codes and ordinances.
2. Do not modify the plug provided - if it
will not t the outlet, have the proper outlet
installed by a qualied electrician.
3. Improper connection of the equipment-
grounding conductor can result in a risk
of electric shock. The conductor with
insulation having an outer surface that is
green with or without yellow stripes is the
equipment-grounding conductor. If repair or
replacement of the electric cord or plug is
necessary, do not connect the equipment-
grounding conductor to a live terminal.
4. Check with a qualied electrician
or service personnel if the grounding
instructions are not completely
understood, or if in doubt as to whether the
tool is properly grounded.
5. Use only 3-wire extension cords that
have 3-prong grounding plugs and 3-pole
receptacles that accept the tool’s plug.
6. Repair or replace damaged or worn
cord immediately.
7. This tool is intended for use on a circuit
that has an outlet that looks like the one
illustrated in Sketch A in the gure below.
The tool has a grounding plug that looks
like the plug illustrated in Sketch A in the
figure below. A temporary adapter, which
looks like the adapter illustrated in Sketches
B and C, may be used to connect this plug
to a 2-pole receptacle as shown in Sketch
B if a properly grounded outlet is not
available. The temporary adapter should be
used only until a properly grounded outlet
can be installed by a qualified electrician.
The green-colored rigid ear, lug, and the
like, extending from the adapter must be
connected to a permanent ground such as
a properly grounded outlet box.
Grounding
Pin
Grounding Pin
Adapter
Metal
Screw
Cover of
Grounded
Outlet Box
Grounding
Means
AA210
(C)
(D)
(A)
(B)
8. Keep guards in place and in working
order.
9. Remove adjusting keys and wrenches.
Form the habit of checking to see that keys
and adjusting wrenches are removed from
the tool before turning it on.
10. Keep the work area clean. Cluttered
areas and benches invite accidents.
11. Don’t use in dangerous environments.
Don’t use power tools in damp or wet
locations, or expose them to rain. Keep the
work area well lighted.
12. Keep children away. All visitors should
be kept safe distance from the work area.
13. Make the workshop child proof with
padlocks, master switches, or by removing
starter keys.
14. Don’t force the tool. It will do the job
better and more safely at the rate for which
it was designed.
SAFETY INSTRUCTIONS