Product Manual

Page 22
TROUBLESHOOTING
PROBLEM CAUSE SUGGESTED CORRECTIVE ACTION
The router does
not work.
The router is not plugged into
the table outlet.
Insert router power cord plug into a
table outlet.
The router-table cord is not
connected to a power source.
Plug the router-table cord into a pow-
er source.
The switch on the router table
is in the “OFF” position.
Insert key and pull the switch to the
ON position.
The table surface
is not flat.
The legs are not properly as-
sembled.
Check assembly directions, and tight-
en all fasteners securely.
The work surface is not flat.
Place the router table on a flat, level
surface.
The router can-
not be attached
to the table.
The sub-base and the dust ex-
traction adaptor are still on the
router.
Remove the plastic sub-base and
dust extraction adaptor from the
router.