Product Manual

Page 17
4. Place the feather-board locking knobs
onto the bolt, adjust the position of
feather-board by pulling the square neck
of the bolt, and then tighten the feather-
board locking knob clockwise to secure
the feather board (L) to the fence.
Attach the feather board to the tabletop
surface
1. Remove the feather-board locking knobs.
2. Slide the square-neck bolts into the
slots of the tabletop (H).
3. Place the feather board (L) on the
tabletop surface as shown in Fig. 20.
4. Slide a plain washer onto the bolt.
5. From underneath the table, place the
feather-board locking knob onto the
bolt, from underneath of the table,
depress the square neck of the bolt into
the slot and tighten the feather-board
locking knob clockwise to secure the
feather board (L) to the fence.
To remove the feather board
1. Loosen the feather-board locking
knobs; slide the feather board into the
hole in the miter-gauge slot.
2. Pull the feather board up to remove it.
ASSEMBLY
OPERATION
SWITCH OPERATION
(FIG. 21, FIG. 22A-22B)
FIG. 21
Safety Key
FIG. 22A
FIG. 22B
The switch has a safety key to help prevent
accidentally switching the router ON and to
prevent unauthorized, possibly hazardous
use by others.
The safety key (yellow) must be completely
inserted into the switch panel (red) before
the switch can be turned ON.
To operate the switch:
1. Insert the safety key into the switch
(Fig. 21).
2. To turn the router ON, lift up the ON/OFF
switch (Fig. 22a).
3. To turn the router OFF, press down on
the ON/OFF switch down (Fig. 22b).
WARNING:
Never leave the router
unattended while it is running or before it
comes to a complete stop.