Product Manual

ManualsBrandsMasterforce ManualsPower Tools2-1/2 HP Digital Variable Speed Plunge & Fixed Base Router Combo Kit with Table

Page 13

4. Remove the base plate from the router

and hold the router upside down (Fig. 11).

If your router model is listed in Table 2,

determine the hole pattern that matches

the mounting hole pattern for your router,

as shown in Table 2 and Fig. 12.

FIG. 12

A

A

A

C

C

C

C

B

B

B

5. Align the above-the-table height

adjustment hole in your router. At the

same time, align the three corresponding

mounting holes A in the center of the

table with the holes in the router, as

shown in Fig. 13.

6. Insert 3 ﬂat-head bolts (U) through each

of the three chosen mounting plate

holes and into the mounting holes on

the router (Fig. 13).

FIG. 13

REMOVING THE MOUNTING PLATE

FROM THE TABLE (FIG. 10)

FIG. 10

1. Loosen the mounting-plate locking

screws by turning them counterclockwise

with the wrench (supplied) and remove

the four screws.

2. Remove the mounting plate from the

tabletop.

ATTACHING YOUR ROUTER TO

THE MOUNTING PLATE (FIG. 11-13)

FIG. 11

NOTICE: Attach the router to the router

table after you have assembled the table.

1. Unplug the router.

2. Place the router table upright, with the

front edge closest to you.

3. Be sure that the table is stable and that

it rests on both legs.

ASSEMBLY