Product Manual

Page 11
4. To install the front panel (G) onto the
right side panel assembly, slide the front
panel (G) to insert the molded-in pin into
the hole in the right side panel (D). Use a
pan-head cross screw (S) to attach the
front panel. Tighten the screw (S) with
the wrench (supplied) (Fig. 4).
FIG. 4
S
Molded-in pin
G
D
5. Place the right side panel beside the left
side panel. Insert the molded-in pin on
the front panel (G) into the hole in the
left side panel (C). Use a pan-head cross
screw (S) to attach the front panel (G).
Tighten the screw (S) with the wrench
(supplied) (Fig. 5).
FIG. 5
C
G
Molded-in
pin
S
6. Use two pan-head cross screws (S) to
attach the right side panel (D) assembly
onto the back panel assembly (B).
Tighten the two screws (S) with the
wrench (supplied) (Fig. 6).
FIG. 6
D B
S
7. Turn the assembly so that is lying on the
front panel (G) (Fig. 7). Place the bottom
panel (A) onto the assembly. Use six
pan-head cross screws (S) to assemble
the bottom panel (A) and tighten the
screws (S) with the wrench (supplied)
(Fig. 7).
FIG. 7
Door
Magnet
AS
Handle
G
E
NOTICE: When placing the bottom panel
(A) onto the assembly, make sure that the
door magnet on the bottom panel (A) is
always at the same side as the handle on
the door.
ASSEMBLY