Product Manual

Page 10
ASSEMBLY
UNPACKING
1. Carefully remove the tool and any
accessories from the box. Make sure
that all items listed in the packing list
are included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
ASSEMBLE THE CABINET
(FIG. 1-7, FIG. 7A)
1. Use two pan-head cross screws (S) to
attach the shelf (F) to the left side panel
(C). Tighten the screws (S) with the
wrench (supplied) (Fig. 1).
FIG. 1
F
C
S
2. Align the holes of the left side panel with
the holes of the back panel (B); note
the orientation of the holes on the back
panel and left side panel. Use three pan-
head cross screws (S) to attach the left
side panel assembly to the back panel
(B). Tighten the screws (S) with the
wrench (supplied) (Fig. 2).
FIG. 2
B
Hole
Left side panel
assembly
S
3. Align the holes of the hinge with the
holes on the right side panel (D). Use
four tapping screws (R) to connect
the door (E) with the right side panel.
Tighten the screws (R) with the wrench
(supplied) (Fig. 3).
FIG. 3
E
R
Latch
D