Installation Instructions

Page 7
If any part is broken or
missing, DO NOT attempt to attach the
battery or operate the Power Source until
the broken or missing part is replaced.
Failure to do so could result in possible
serious injury.
Use only with the
specied battery and charger. For specic
charging instructions, read the operator’s
manual supplied with your charger and
battery.
Do not attempt to
modify this Power Source or create
accessories not recommended for use
with this Power Source. Any such
alteration or modication is misuse and
could result in a hazardous condition
leading to possible serious injury. To
prevent accidental starting that could
cause serious personal injury, always
remove the battery pack from the Power
Source when assembling parts.
Always remove the battery pack before
changing or removing accessories. Only
use accessories specically recommended
for this tool. Others may be hazardous.
INSERTING/REMOVING THE
BATTERY (FIG. 2)
1. To insert the battery, align the raised
ribs on the battery pack with the grooves
in the Power Source, and then attach the
battery pack to the Power Source.
2. To remove the battery, depress the
battery release buttons located on the both
sides of the battery pack to release the
battery pack. Pull the battery pack out and
remove it from the Power Source.
UNPACKING
This product has been shipped completely
assembled.
1. Carefully remove the Power Source
from the box.
2. Inspect the Power Source carefully to
make sure no breakage or damage
occurred during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
PACKING LIST
12.0-Volt Lithium-Ion power source and
Operator’s Manual
ASSEMBLY
WARNING:
WARNING:
OPERATION
Remove
Insert
FIG. 2
WARNING: