2.0-Volt Lithium-Ion Power Source 241-0318 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
table of contents Safety Symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2 Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3 Overview / Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
safety symbols Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
safety INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention measures.
safety INSTRUCTIONS WARNING: Read all safety warnings and instructions! Failure to follow the warnings and instructions may result in electric shock, fire and/or serious personal injury. Save these instructions – This operator’s manual contains important safety and operating instructions for the MASTERFORCE 12V Power Source. Before using this Power Source, read this operator’s manual, your battery pack and charger operator’s manuals, and all labels on the battery pack, charger and Power Source.
safety INSTRUCTIONS Battery tool use and care Service 1. Your Power Source is rated for 12 V DC only. Use only appropriate Masterforce battery packs (252-8016). Use of any other battery pack may create a risk of injury and fire. 1. Do not disassemble. Incorrect reassembly may result in the risk of electric shock or fire. 2. Recharge only with the charger specified in the table below. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 3.
overview FIG. 1 Fuel Gauge 5V USB receptical 12V DC receptical Access door • F uel gauge: Green, and red LED lights indicate the amount of charge remaining. • 5 V DC USB port: power for 5V appliances with working current less than 1.5A • 12V DC port: power for 12V automotive appliances with working current less than 3A. • Both ports can power for smarts phones, digital cameras, MP3 players, navigator, etc. • Access door: protects the ports from dirt and short-circuit.
assembly UNPACKING WARNING: If any part is broken or missing, DO NOT attempt to attach the battery or operate the Power Source until the broken or missing part is replaced. Failure to do so could result in possible serious injury. WARNING: Use only with the specified battery and charger. For specific charging instructions, read the operator’s manual supplied with your charger and battery.
operation Fuel Gauge To indicate the battery-pack charge level, after inserting the battery pack into the power source, the Fuel Gauge will light up for 5-6 seconds. The functions of Fuel Gauge are listed: LED INDICATOR ON WORKING LOW BATTERY SLOW FLASHINGOVERLOADED/ DEFECTIVE DEVICE RAPID FLASHINGHI/LO TEMP. RED LED GREEN LED MEANING ON Power Source is providing power to device(s).
Maintenance WARNING: To avoid serious personal injury, always remove the battery pack from the Power Source when cleaning or performing any maintenance. Never disassemble the power source, battery pack or charger. WARNING: Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
notes Page 10
notes Page 11
notes Page 12
notes Page 13
12.0-Volt Lithium-ion Power Source WARRANTY 90-DAY MONEY BACK GUARANTEE: This MASTERFORCE® brand power tool carries our 90-DAY Money Back Guarantee. If you are not completely satisfied with your MASTERFORCE® brand power tool for any reason within ninety (90) days from the date of purchase, return the tool with your original receipt to any MENARDS® retail store, and we will provide you a refund – no questions asked.
© 2011 Menard, Inc.
