Operator`s manual
Page 8
SPECIFICATIONS
Illumination source Incandescent lamp
Run-time More than 2 hours
Bulb Type Incandescent ( single contact base)
Bulb power 18V DC 300mA
Pivoting head 90 degrees
Pivoting handle 130 degrees
Worklight weight (without battery) 10 oz.
If any part is broken or
missing, DO NOT attempt to attach the
battery or operate the worklight until
the broken or missing part is replaced.
Failure to do so could result in possible
serious injury.
Do not attempt to
modify this worklight or create
accessories not recommended for use
with this worklight. Any such alteration or
modication is misuse and could result in
a hazardous condition leading to possible
serious injury.
UNPACKING
This product has been shipped completely
assembled.
1. Carefully remove the tool and any
accessories from the box. Make sure
that all items listed in the packing list
are included.
2. Inspect the tool carefully to make sure
that no breakage or damage occurred
during shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
4. If any part is damaged or missing,
please refer to the numbers listed on
the back page of the operator’s manual.
PACKING LIST
Worklight, Operator’s Manual
ASSEMBLY
WARNING:
WARNING: