Operator`s manual

PUSH
Page 7
WARNING:
The safe use of this
product requires an understanding of the
information on the tool and in this
operator’s manual, as well as knowledge
of the project you are attempting. Before
use of this product, familiarize yourself
with all operating features and safety
rules.
• Adjustable focus loop: Focus the
worklight by rotating the focus loop.
• Handle pivot: The adjustable handle
pivots 130° and features 3 positive stops
for maximum exibility.
•   Head pivot: The adjustable head pivots
90° and allows for precise positioning of
the light beam.
OVERVIEW
FIG. 1
Head
SAFETY INSTRUCTIONS
10. Do not operate the charger if it has
received a sharp blow, been dropped, or
has otherwise been damaged in any way.
Take it to a qualied service technician
for an electrical check to determine if the
charger is in good working order.
11. Do not disassemble the charger. Take
it to a qualied service technician when
service or repair is required. Incorrect
reassembly may result in a risk of electric
shock or re.
12. Unplug the charger from the electrical
outlet before attempting any maintenance
or cleaning to reduce the risk of electric
shock.
Reector
Bulb
Pivot-release button
Adjustable focus loop
13. Disconnect the charger from the
power supply when not in use. This will
reduce the risk of electric shock or
damage to the charger if metal items
should fall into the opening. It will also help
prevent damage to the charger during a
power surge.
14. Risk of electric shock. Do not touch the
uninsulated portion of the output connector
or uninsulated battery terminal.
15. Save these instructions. Refer to them
frequently and use them to instruct others
who may use this tool. If you lend this tool
to someone else, also lend these
instructions to them to prevent misuse of
the product and possible injury.
Switch
Handle