Operator`s manual

Page 5
3. When the battery pack is not in use,
keep it away from other metal objects,
like paper clips, coins, keys, nails,
screws or other small metal objects that
can make a connection from one
terminal to another. Shorting the battery
terminals together may cause burns or a
re.
4. Under abusive conditions, liquid may
be ejected from the battery; avoid contact.
If contact accidentally occurs, ush with
water. If liquid contacts eyes, also seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
SERVICE
1. Have your power tool serviced by a
qualied repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
SPECIFIC SAFETY RULES FOR
CORDLESS WORKLIGHT
1. Do not operate the tool or charger
near ammable liquids or in gaseous or
explosive atmospheres. Internal sparks
may ignite fumes.
2. The light lens becomes hot during use:
During or immediately after use, don’t lay
the tool at on the light lens surface or
place the lens area onto a plastic or
fabric covered surface.
• Handle the tool with care around any
ammable surface.
• Do not use or permit use of the tool in
bed or sleeping bags. This tool lens can
melt fabric and a burn injury could result.
3. Do not let gasoline, oils, petroleum-
based products, etc., come in contact with
plastic parts. They contain chemicals that
can damage, weaken, or destroy plastic.
4. DO NOT stare directly at the light or
project the light directly into the eyes of
others near by.
SAFETY INSTRUCTIONS
5. Use only with the batteries and charger
listed:
Battery pack Charger
252-8024
252-8036
252-8037
252-8044
252-8028
252-8030
252-8031
252-8032
252-8029
252-8033
252-8034
6. Know your worklight. Read the
operator’s manual carefully. Learn the
applications and limitations, as well as the
specic potential hazards related to this
tool. Following this rule will reduce the risk
of electric shock, re or serious injury.
7. Battery tools do not have to be plugged
into an electrical outlet; therefore, they are
always in operating condition. Be aware
of possible hazards when not using your
battery tool or when changing accessories.
Following this rule will reduce the risk of
electric shock, re or serious personal injury.
8. Do not stare directly into the worklight.
Avoid direct eye contact; never project the
worklight into others’ eyes. Failure to do so
will lead to serious personal injury.
9. Remove the battery pack from the worklight
before performing any maintenance or cleaning.
10. Do not disassemble the worklight.
11. Do not place the worklight or battery
pack near re or heat. They may explode.
12. Do not operate the worklight or the
charger near ammable liquids or in a
gaseous or explosive environment. Internal
sparks may ignite fumes.
13. To reduce the risk of electric shock, do
not put the worklight, battery or charger in
water or other liquid. Do not place or store
the product where it can fall or be pulled into
a tub or sink.
14. Do not store the worklight in a damp or
wet location.