Operator`s manual

Page 9
TO ATTACH BATTERY PACK
(FIG. 2)
1. Align the raised portion on the battery
pack with the grooves on the bottom
of the worklight, and then attach the
battery pack to the worklight as shown.
2. Make sure the latch on the battery
pack snaps into place and the battery
pack is secured to the worklight before
beginning operation.
TO DETACH BATTERY PACK
(FIG. 2)
1. Press the latch located on the front of
the battery pack to release the battery
pack.
2. Pull forward on the battery pack to
remove from the worklight.
ADJUSTING THE WORKLIGHT
HANDLE AND HEAD
(FIGS. 3-4)
The worklight head and handle pivot
independently for maximum exibility. The
handle can pivot 130° and has three positive
stops. The head pivots 90°.
1. Press the pivot-release button and
move the handle to any of the three
positive stops. Do not force the handle
beyond the 130° range.
2. Move the head by manually rotating
it into any position within the 90°. Do
not force the head beyond the 90°
range.
OPERATION
FIG. 2
Head adjusts 90°
Pivot-release button
Handle adjusts 130°
PUSH
PUSH
FIG. 3
PUSH
PUSH
FIG. 4