Operator`s manual

Page 8
SPECIFICATIONS
1/4 IN. QUICK CHUCK
Quick and easy bit changes without the
need for tools.
VARIABLE SPEED
The variable speed trigger switch delivers
higher speed with increased trigger
pressure and lower speed with decreased
trigger pressure.
FORWARD/CENTER LOCK/RE-
VERSE
The right angle drill has a direction of
rotation selector for changing the
direction of bit rotation; it is located above
the trigger switch. Setting the trigger switch
in the OFF (center lock) position helps
reduce the possibility of accidental starting
when not in use.
LED WORKLIGHT
The LED worklight, located on the front of
the right angle drill, illuminates when the
trigger switch is depressed. This feature
provides extra light for increased visibility.
ELECTRIC BRAKE
The electric brake will stop the bit rotation
after the operator releases the trigger
switch.
ASSEMBLY
WARNING:
If any part is broken
or missing, do not attempt to attach the
battery or operate the right angle drill until
the broken or missing parts are replaced.
Failure to do so could result in possible
serious injury.
WARNING:
Do not attempt to
modify this right angle drill or create
accessories not recommended for use
with this right angle drill. Any such
alteration or modification is misuse and
could result in a hazardous condition
leading to possible serious injury.
WARNING:
To prevent accidental
starting that could cause serious personal
injury, always remove the battery pack
from the right angle drill when
assembling parts.
UNPACKING
This product has been shipped completely
assembled.
1. Carefully remove the tool and any
accessories from the box. Make sure
that all items listed in the packing list
are included.
2. Inspect the tool carefully to make sure
no breakage or damage occurred during
shipping.
3. Do not discard the packing material
until you have carefully inspected and
satisfactorily operated the tool.
CONTENTS
Right angle drill, 1pc PH2 bit, nylon storage
bag and operator’s manual.