Installation Instructions

TABLE OF CONTENTS
Safety Symbols ..................................................................................Page 3
Safety ..................................................................................................Page 4
Parts List ............................................................................................Page 5
Overview ............................................................................................. Page 5
Assembly ............................................................................................Page 6
Maintenance.....................................................................................Page 10
Warranty ........................................................................................... Page11
SAFETY SYMBOLS
Some of the following symbols may be used on your tool. Please study them and le·arn
their meaning. Proper interpretation of these symbols will allow you to operate the tool
SAFETY SYMBOLS
c us This Symbol Designates That This Tool Is Listed By Underwriters
Laboratories, To United States And Canadian Standards
LISTED
This Symbol Designates That This Tool Is
Listed By Underwriters Laboratories
LISTED
This Symbol DesignatesThat Th1is Tool Is Listed By The lntertek
Testing Services, To United States And Canadian Standards
c~us
This Symbol Designates That This Tool Is Listed By The Canadian
~ff®
Standards Association, To United States And Canadian Standards
C
us
This Symbol Designates That This Tool ls Listed
By The Canadian Standards Association
Page 2
better and safer.
Symbol Name
V Volts
A Amperes
Hz Hertz
w Watts
~
Alternating current
-
---
Direct current
no
No-load speed
lbs Pounds
... /min Per minute
[g]
Class 11construction
e
Read the operator's
Manual
e
Wear safety glasses
(J
Wear respiratory
Protection
0
Wear hearing
Protection
8
Wear gloves
A
Warning symbol
Designation/ Explanation
Voltage
Current
Frequency (cycles per second)
Power
Type of current
Type or characteristic of current
Rotational speed, at no load
Weight
Revolutions, strokes, surface speed orbits,
etc. per minute
Double-insulated construction
To reduce the risk of injury, read
and understand operator's manual
Operation of power tool can result in
foreign objects being thrown into eyes
Use of this tool can generate dust
which may cause respiratory injury
Noise from this product
can contribute to hearing loss
Wear gloves to reduce risk of injury
Alerts user to warning messages
The purpose of safety symbols is to attract our attention to possible dangers. The safety
symbols, and the explanations with them, deserve your careful attention and understanding.
The symbol warnings do not by themselves eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident prevention measures.
IA WARNING: Ie.e sure to read and understand all safety instructions in this
manual, including all safety alert symbols such as "DANGER", "WARNING" and
"CAUTION", before using this power tool. Failure to follow all instructions listed
below may result
in electric shock, fire and/or serious personal injury.
SYMBOL MEANING
A
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.
May be used in conjuntion with other symbols or pictographs
ADANGER:
Failure to obey this warning WILL result in death or serious
injury to yourself or to others. Always follow the safety precautions to reduce the
risk of fire, electric shock and personal injury.
IA WARNING: IFailure to obey this safety warning CAN result in death or
serious injury to yourself or to others. Always follow the safety precautions to
reduce the risk of fire, electric shock and personal injury.
IA CAUTION: IFailure to obey this safety warning MAY result in personal
injury to yourself or others or property damage. Always follow the safety
precautions to reduce the risk of fire, electric shock and personal injury.
Page 3