Use And Care Manual

Page 10
OPERATION
FIG. 12
Cruise
control lever
Turbo button
OPERATION TIPS
• To keep from scattering debris, blow
around the outer edges of a debris pile.
Never blow directly into the center of a pile.
• To reduce sound levels, limit the number of
pieces of equipment used at any one time.
• Use rakes and brooms to loosen debris
before blowing. In dusty conditions, slightly
dampen surfaces when water is available.
• Conserve water by using power blowers
instead of hoses for many lawn and garden
applications, including areas such as
gutters, screens, patios, grills, porches,
and gardens.
• Watch out for children, pets, open windows,
or freshly washed cars, and blow debris
safely away.
• After using blowers or other equipment,
clean up. Dispose of debris properly.
FIG. 13
START / STOP THE BLOWER
Before start-up, make sure that the blower
is in perfect condition to guarantee safe
operation.
1. Squeeze the switch trigger to start.
2. To change speed, press or release trigger
by degrees to increase or decrease the
speed.
FIG. 11
Trigger
CRUISE CONTROL LEVER
This blower is equipped with a cruise control
function. Please read and understand the
function of the cruise control lever.
1. Squeeze the trigger to start the unit.
2. Once the unit is on, pull the lever back
clockwise to increase the speed. This will
lock the speed at the desired setting.
3. To decrease the speed, push the lever
counter clockwise to decrease the speed
to the desired setting.
NOTE:If you decrease the speed all the
way, the unit will stop and it is necessary
to do the rst step again.
TURBO BUTTON
1. Push the turbo button, the machine is at
the highest speed.
2. Release the turbo button, the machine is at
the normal speed.