80V BRUSHLESS JET BLOWER 267-3119 2400094ME BLB482 OPERATOR’S MANUAL CAUTION To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols............................................................................................................ Page 2 Safety Instructions....................................................................................................... Page 3 Overview...................................................................................................................... Page 6 Specifications......................................................................................
SAFETY SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. Symbol Name Designation / Explanation V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watts Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current Class II Construction Double-insulated construction.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract our attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitutes for propper accident prevention measures.
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING (THIS POWER TOOL) WARNING Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. When using an electrical appliance, basic precautions should always be followed, including the following: • Do not use on wet surfaces. • Do not charge the unit outdoors. • For household use.
SAFETY INSTRUCTIONS • Use only the charger supplied by the manufacturer to recharge. • Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. • Prevent unintentional star ting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carry the power tool with your finger on the switch or energize power tool that have the switch on invites accidents.
OVERVIEW Battery Release Button Turbo Button Cruise Control Lever Variable Speed Trigger Blower Tube SPECIFICATIONS Type Cordless, battery operated Motor 80V Brushless Air Volume 580 CFM Air speed 145 MPH Trigger Variable Speed Weight (Without Battery) 5.41 lbs (2.
ASSEMBLY UNPACKING FIG. 2 This product requires assembly. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the package contents section are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. • If any parts are damaged or missing, please call 1-844-MSTR4CE (844-678-7423) for assistance.
ASSEMBLY THE BATTERY PACK WARNING Follow these instructions in order to avoid injury and to reduce the risk of electric shock or fire: • Replace the battery pack or the charger immediately if the battery case or charger cord is damaged. • Verify that the switch is in the OFF position before inserting or removing the battery pack. • Verify that the battery pack is removed and the switch is in the OFF position before inspecting, adjusting, or performing maintenance on any part of the blower.
OPERATION START / STOP THE BLOWER To start 1. Squeeze the trigger to start the blower. 2. Pull the trigger fully to increase the speed. 3. Release the trigger to decrease the speed. FIG. 6 Cruise control Turbo button To stop 1. Release the trigger to stop the machine. FIG. 5 Trigger OPERATION TIPS CRUISE CONTROL This blower is equipped with a cruise control function. Please read and understand the function of the Cruise Control. • Pull the cruise control lever clockwise to increase the speed.
MAINTENANCE CLEAN THE MACHINE STORE THE MACHINE • Clear the unwanted material out of the air vent with a vacuum cleaner. • Do not spray the air vent or put the air vent in solvents. • Clean the housing and the plastic components with a moist and soft cloth. • Clean the machine before storage. • Make sure that the motor is not hot when you store the machine. • Make sure that the machine does not have loose or damaged parts. If it is necessary, do these steps/instructions: 1. Replace the damaged parts. 2.
EXPLOPDED VIEW 1 2 Page 11 No. Part No.
NOTES Page 12
NOTES Page 13
80V BRUSHLESS JET BLOWER WARRANTY 4-YEAR LIMITED WARRANTY This MASTERFORCE™ brand power tool carries our famous No Hassle 4-Year Limited Warranty to the original purchaser. If, during normal use, this MASTERFORCE™ power tool breaks or fails due to a defect in material or workmanship within four (4) years from the date of original purchase, simply bring the tool with the original sales receipt back to your nearest MENARDS® retail store.
© 2019 Menard, Inc.
