Assembly Instructions

Page 5
NECESSARY TOOLS REQUIRED
FOR AS S EMB LY
• 10 mm socket
• Phillips screw driver
• Extension ratchet
IMPORTANT: THIS STORAGE LOCKER
WILL FIT ON VIRTUALLY ANY CABINET
41" OR WIDER. THE UNIVERSAL
MOUNTING SYSTEM FITS MOST TOOL
STORAGE CABINETS WITH A TOP LIP
MORE THAN 1/2" THICK AND AT LEAST
24" DEEP.
INSTALL THE HANGER
Position the hanger over the holes on the
side locker and attach with the M6 x 16
counter sink screws. Tighten securely.
NOTE: Use the upper holes when attaching
to a 72" cabinet.
The locker can be mounted on either side.
See page 7 for complete instructions.
ATTACH THE EVA PADS
Attach the two EVA pads to the side locker
in the locations indicated below.
HANG THE
SIDE LOCKER
NOTE: Two or more people may be
required to complete this step.
CAUTION: This product should not be
mounted on an empty cabinet.
Hang the side locker on your cabinet.
CONNECT
THE CABINETS
Position the connecting channel on the back
of the locker and roller cabinet. Attach the
connecting channel to the locker with two
M6 x 16 hex bolts and to the roller cabinet
with one M6 x 16 hex bolt.
ASSEMBLY AND OPERATION