80V BRUSHLESS HEDGE TRIMMER 267-1543 2200094ME HTB406 OPERATOR’S MANUAL CAUTION To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols ........................................................................................................... Page 2 Safety Instructions ...................................................................................................... Page 3 Overview ..................................................................................................................... Page 7 Assembly ...........................................................................................
SAFETY SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. Symbol Name V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current Wet Conditions Alert Do not expose to rain or use in damp locations.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract our attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitutes for propper accident prevention measures.
SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING (THIS POWER TOOL) WARNING Read and understand all instructions before using this product. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. When using an electrical appliance, basic precautions should always be followed, including the following: WORK AREA SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents.
SAFETY INSTRUCTIONS • • • • power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Maintain power tools.
SAFETY INSTRUCTIONS WARNING Only use with handle and guard properly assembled to hedge trimmer. The use of the hedge trimmer without the proper guard or handle provided may result in serious personal injury. view of a child who may run into the path of the blower. SAVE THESE INSTRUCTIONS PROPOSITION 65 This product contains a chemical known to the state of California to cause cancer, birth defects or other reproductive harm.
OVERVIEW Battery release button Auxiliary handle Safety lock button Guard Blade Battery pack Trigger Rotation lever SPECIFICATIONS SPECIFICATIONS Page 7 Type Cordless, battery operated Motor 80V Brushless Blade Length 24" (61 cm) Cutting Capacity 3/4" (18 mm) No Load Speed 3400 (±10%) SPM Weight (Without Battery) 8.37 lbs.
ASSEMBLY UNPACKING FIG. 1 Battery release button This product requires assembly. • Carefully remove the product and any accessories from the box. Make sure that all items listed in the package contents section are included. • Inspect the product carefully to make sure no breakage or damage occurred during shipping. • Do not discard the packing material until you have carefully inspected and satisfactorily operated the product.
OPERATION START / STOP THE BLOWER To start 1. Press and hold the safety lock button. 2. Squeeze the trigger to start the machine. 3. Release the trigger to decrease the speed. 4. Release the lock-out button. The hedge trimmer will stay on as long as the trigger switch is engaged. To stop 1. Release the trigger to stop the machine. IMPORTANT: If the hedge trimmer is accidentally dropped, the hedge trimmer will turn OFF and the blade will coast to a stop after several seconds.
MAINTENANCE CLEAN THE MACHINE LUBRICATE THE BLADE • Clear the unwanted material out of the air vent with a vacuum cleaner. • Do not spray the air vent or put the air vent in solvents. • Clean the housing and the plastic components with a moist and soft cloth. To increase the efficiency and life of the blades, lubricate them carefully after each work session: • Put the machine on a flat and smooth surface. • Use a soft cloth to clean the blades and a brush to remove more dirt.
EXPLODED VIEW No. Part No.
NOTES Page 12
NOTES Page 13
80V BRUSHLESS HEDGE TRIMMER WARRANTY 4-YEAR LIMITED WARRANTY This MASTERFORCE™ brand power tool carries our famous No Hassle 4-Year Limited Warranty to the original purchaser. If, during normal use, this MASTERFORCE™ power tool breaks or fails due to a defect in material or workmanship within four (4) years from the date of original purchase, simply bring the tool with the original sales receipt back to your nearest MENARDS® retail store.
© 2019 Menard, Inc.
