Operating instructions

Long term preservation of

seepex Progressive cavity pumps

Dokument / document

TI.114.01e

Ausgabe / issue

D / 07.05.08

Blatt / sheet

2 (3)

2.1.5 Recommissioning

NOTICE

Before starting work read the operating instruction.

• Pay attention to a correct re-assembly of parts dismantled before.

2.2 Measures for preservation 2

In case of the correct storage and under consideration of the preservation measures, a

storage of the pump is possible for max. 2 years.

NOTICE

In case of a longer storage period, the dimensions and shore hardness can change.

The function of the pump can be impaired.

 Bevor recommissioning Elastomere parts (stator, joint seal, gaskets, ...) have to be

checked for crack formation and change of the surface.

2.2.1 Storing of the pump/pump parts

• in dry and closed rooms

• free from vibration

Particular adjacent influences have to be advised by the customer and have to be checked

and released by seepex before storage.

2.2.2 Storing of the stator

Store the stator separate (relevant standard ISO 2230):

• dry

• constant tempered at 10-15°C (max. 25°C)

• protected against light / stored in darkness (e.g. in a closed case or packed accordingly)

2.2.3 Gear

Note instruction of the manufacturer.

• Follow advice on the gear.

• Reduce quantity of lubricant to the quantity stipulated for the operation

before commissioning!

• Reinstall vent screw during commissioning.

Belt Variable Speed Drive:

Store the belt separate (relevant standard ISO 2230):

• dry

• constant tempered at 10-15°C (max. 25°C)

• protected against light / stored in darkness (e.g. in a closed case or packed accordingly)