Operating instructions

EC Declaration of Conformity
complying with the Machinery Directive 98/37/EC, Appendix II A
Manufacturer: seepex GmbH
seepex GmbH
Scharnhölzstraße 344
46240 Bottrop
Postfach 10 15 64
46215 Bottrop
PO Box 10 15 64
46215 Bottrop
Germany
Tel [phone]
Fax [phone]
[e-mail]
www.seepex.com
Rechtsform: Geschäftsführender
GmbH Gesellschafter:
HRB 9350 Gelsenkirchen Ulli Seeberger
Address: Scharnhölzstrasse 344
D-46240 Bottrop
We hereby declare that the following product
Progressive cavity pump
of ranges
• BN, BE, BK, BS, BC, BCSB, BCSO, BW, BA, MD, MDC, MDF, MDP
- as block pump complete with flanged drive
and ranges
• NS, N, S, C, CSB, CSO
- as pump with free bareshaft, with drive
- as pump with drive preassembled on a common baseplate
meets
the regulations of the above mentioned directive as well as its
amendments which are valid at the time of declaration.
The following harmonized standards are applicable:
DIN EN ISO 12100-1 Safety of machinery Part 1
DIN EN ISO 12100-2 Safety of machinery Part 2
DIN EN 294 Safety distances to prevent danger zones being
reached by the upper limbs
DIN EN 809 Pumps and pump units for liquids
DIN EN 811 Safety distances to prevent danger zones being
reached by the lower limbs
The appertaining operating instruction includes important safety advices and
rules for installation, commissioning and maintenance of the seepex machinery.
The safeguarding of the machinery against inadmissible pressure, dry running
and wrong direction of rotation must be ensured at site.
Bottrop, 16.09.2005
i.V. Klemens Fockenberg i.V. Roland Hecker
Manager Engineering Manager Quality Assurance
seepex GmbH seepex GmbH
3