Operating instructions

9.2
Rotating Unit
Individual Parts
Ausgabe
issue
A / 21.03.07
Dokument
document
OM.PJT.16e
Blatt
sheet
3 (3)
9.2.3.2 Retaining sleeve (401) - reassembly
Tool (W4/ assembly
mandrel)
 Knock back the retaining sleeve (401).
• Use tool (W4).
 Secure the retaining sleeve (401) in a
displaced manner (2x180°).
• Use suitable tool (WK).
Tool (W15/Mounting plate)
 Remove tool (W15).
9.2.3.3 Universal joint sleeve (405) – reassembly
 Moisten the surface of the coupling rod
(400)/ interior of the universal joint
sleeve (405) with joint grease
(maintenance, Chapter 7.0).
 Slide on the universal joint sleeve
(405).
Vent the inside area of the joint.
Use suitable tool (WS).
Assemble holding band
Holding band assembly (Chapter 9._).
405600
WS
405
405 406407
401
WK
307
401W4
21