Operating instructions

9.2
Rotating Unit
Individual Parts
Ausgabe
issue
A / 21.03.07
Dokument
document
OM.PJT.16e
Blatt
sheet
2 (3)
9.2.2 Rotating unit (RTE) – prepare individual parts for reassembly
9.2.2.1 Rotor (600)
 Remove existing damage.
 Clean the rotor (600).
Tool (W4/assembly
mandrel)
 Press in the guide bushing (403)
- Use tool (W4).
9.2.2.2 Plug-in shaft (307)
 Remove existing damage.
 Clean the plug-in shaft (307).
Tool (W4/assembly
mandrel)
 Press in the guide bushing (403)
- Use tool (W4).
9.2.3 Rotating unit (RTE) – individual parts – reassembly
HINWEIS
Faulty functioning of joints
Malfunctioning and/or destruction of joints.
Damage to property may result.
 Replace the coupling rod pins (402) and guide bushing (403) jointly.
9.2.3.1 Rotor (600) / Plug in shaft (307) – reassembly
 Slide the universal joint sleeve (405)
onto the Rotor (600).
 Fill the joint head with seepex joint
grease.
 Side on retaining sleeve (401).
 Insert coupling rod pins (402).
 Connect the Rotor (600)/plug in
shaft(307).
 Slide in coupling rod pins (402).
 Knock the guide bushing (403) in.
- Use tool (W5).
Tool (W5/ Drift).
403W4 600403
403
W4
307403
307600 405 401 402
307600 405 402 403W5
20