Operating instructions

5.0

Assembly/Installation

Ausgabe

issue

A / 23.01.07

Dokument

document

OM.INS.08e

Blatt

sheet

1 (2)

5.1 Mounting tools/lifting gear

CAUTION

Pump falling over

Slight injury or damage to property may result.

 Adhere to the lifting tool’s starting point.

 Pay attention to the dimensions, weight and centre of gravity of the pump

 Use suitable mounting tools/lifting gear.

5.2 Required space

The required space should be determined by considering the following factors:

• Dimensions and weight.

• Requisite transport and lifting equipment.

• Pipe routing – dismantling (stator construction dimensions).

5.3 Stator construction dimensions (P)

• Refer to the dimensional drawing.

5.4 Erection of the complete mounted pump

 Erect in accordance with technical data (Chapter 3.0).

 Heed dimensional drawing.

Tension-free mounting of the pump

 Balance unevenness with suitable supports.

• Applies to mounting on foundations/load-bearing elements.

• Total areas of all pump bearing areas are resting on the surface.

Correct position of the drives

• All drives are set up ready for operation and mounted.

• Correct slipping of the drive during transport/installation of the pump by adjusting/fixing

the drive motor.

CAUTION

Safety protection equipment.

Slight injury or damage to property may result.

 Connect safety protection equipment and activate.