Instruction manual

NOTE : If there are unprinted data in the memory after changing paper, The printer
Go into online mode automatically and print the remaining data 5 seconds
After closing paper cover.
3-4.Self-test.
The purpose of the self test The self test checks whether the printer has any
problems.
When the printer does not function properly, Please contact the supplier.
* The self test checks the following
+.Control circuit functions +.Software version
+. Setting parameters +. Printer quality
* Running the self test
+.Make sure the cover is closed and roll paper is installed correctly.
+.Turn on the power while pressing the FEED button. The self test begins.
+.The following contents are printed for printer current status printing.
 Version : 1.1.6
 Data bit : 8 bit
 Parity : None
 Baud rate : 9600 bps
 Handshaking : DTR
 Country : USA
 Print mode : Text(upright)
 Paper : Normal paper
 Density : 100%
 IrDA : IrDA-SIR
 Buffer size : 7000Byte
 Head volt : 7.1V
 Head temp : 23C
*
+ The self test automatically ends after printing on the paper.
+ The printer becomes ready to receive data from the host.