Instruction manual

3.Operation
.
3-1.Precautions for installation
.
HANDY-700 Printer may be installed in a variety of applications but, to Maintain
your unit in optimum working conditions, the following recommendations should
Be followed.
 Avoid dirty or dusty location or those with excessive heat or humidity.
 Choose a stable level or solid wall on which to mount the printer.
 Ensure that the adapter provides the correct operating voltage.
 Care must be taken to ensure that any power adapter supplied by the customer meets
With national safety requirements and has the correct output voltage and polarity.
3-2.Opening/Closing of printer cover
Applying your finger on both side of printer, push it up when the lock is released as
Shown in the drawing. It open by about 120° centering around the fixed axis.
For the closing. Pressing the Top cover, Tightly close it until click sound is heard.
Also, confirm, on closing, that paper is free of slackening.
3-3.Installing paper.
Please ensure that the correct grade of paper is used with the HANDY-700.
It is extremely easy to load a new paper roll into the printer by following thease
simple steps :
 Open the cover and remove the old paper core.
 Drop the new roll into the reservoir so that it will rotate in the correct direction
(i.e. so that the emulsion side of the paper outside rests against the print-head)
 Insert the edge of the roll paper into the hole of cover and closing cover.