Instruction manual

B(Battery with external charging)
C(Battery with internal charging)
2.General Guide.
2-1.Description of printer parts
The HANDY700 printer is based around a patented easy-loading printer
mechanism designed. This mechanism consists of a main cavity into which a paper
roll is dropped for loading. The thermal print head is at the front of this cavity and a
rubber roller is attached to the lid of the mechanism. When the lid is closed, The
paper is trapped between the rubber roller and the print-head to give a close
alignment and a consistent pressure.
2-1-1.Indicator lights
The HANDY700 printer has two LEDs on the front panel.
The control panel lights provide information on printer conditions.
POWER LED(Green) : The POWER light is ON when power is turned ON.
The POWER light flashes when head temperature is high(60C).
BATTERY(Red) : The BAT light is ON when battery is under charge the battery.
When the battery is full charged, light is blinks every second.
The BAT light is OFF when printer have no line adapter.
ERROR(Green): The POWER light flashes every second when the paper roll is nothing or
The paper cover is opened.
NOTE : Printer go into online mode automatically and print the remaining
Data 5 seconds after closing paper cover.
2-1-2. Buttons.
FEED Button : Press the FEED button to advance paper. You can also press the FEED button
Continuously to feed paper continuously.
FEED button is not operated when ON line button is off.
SEL Button : SEL Button perform set-up program(See Chapter self-test and set-up mode).
2-1-3.Connectors
The Power connector is fitted on the right side of printer.
This Power connector is for Battery charging and direct DC power supply.
In case of battery with internal charging type, Printer does not work when printer is connected with
adapter directly, without battery.