Instruction manual

GS x n
(Set bar code print starting position)
[Format] ASCII : GS x n
Hex : 1D 78 n
Decimal : 29 120 n
[Description] Sets the bar code print position of beginning(left).
Sets the print position of beginning using the : n x 0.125 mm
Range : n ≤255
Default : 0
[Reference] GS H n, GS w n, GS h n, GS k m[d1…dk] NUL, GS h n, GS k m[d1…dn]
DC2 ! n
(Select print paper)
[Format] ASCII : DC2 ! n
Hex : 12 21 n
Decimal : 18 33 n
[Description] Selects the print paper(defaut = 0).
N Paper
0 Normal
1 Reprint
DC2 # n
(Select print density)
[Format] ASCII : DC2 # n
Hex : 12 23 n
Decimal : 18 35 n
[Description] Sets print density.
N Density N Density n Density
0 50% 7 85% 14 120%
1 55% 8 90% 15 125%
2 60% 9 95% 16 130%
3 65% 10 100% 17 135%
4 70% 11 105% 18 140%
5 75% 12 110% 19 145%
6 80% 13 115% 20 150%
Standard paper : Mitsubishi ,P220AG(100%)
DC2 E
(Set the printing finished)
[Format] ASCII : DC2 E
Hex : 12 45
Decimal : 18 69
[Description] Print data in the print buffer and moves to starting position of next page when printer is
in label mode.
[Description] FF, ESC FF,DC2 m s nL nH
DC2 T
(Test Printing)
[Format] ASCII : DC2 T
Hex : 12 54
Decimal : 18 84
[Description] Print the defaut seting,volt,head temperature and buffer space.
DC2 m s nL nH
(The length of mark position)
[Format] ASCII : DC2 m s nL nH