Instruction manual

Command Summary
Command Name Page
HT Horizontal tab
LF Print and line feed
FF
(1)Print and return
(2)Print and feed label to print starting position
CAN Cancel print data
ESC FF Print data in label mode
ESC ! n Select print modes
ESC $ nL nH Set absolute print position
ESC * m nL nH[d1…dk] Select bit-image mode
ESC – n Turn underline mode on/off
ESC 2 Set 1mm line spacing
ESC 3 n Set line spacing
ESC @ Initialize printer
ESC J n Print and feed paper
ESC R n Select international character set
ESC d n Print and feed paper n lines
ESC E Emphasized character
ESC SP Setting of character space
ESC V n Turn 90 clockwise rotation mode on/off
ESC v Transmit printer status
ESC { n Set/cancel upside-down character printing
FS & Setting Kanji mode
FS ! Specify Kanji print mode
FS - Kanji underline
FS . Cancel Kanji mode
FS S Setting Kanji character space
FS W 4 fold character of Kanji
FS 2 External character
GS ! n Select character size
GS B n Turn white/black reverse printing mode
GS H n Select printing position of HRI characters
GS L nL nH Set left margin
GS h n Select height of bar code
GS k m[d1…dk] NUL Print bar code
GS k m n[d1…dn] Print bar code
GS w n Select bar code width
GS x n Set bar code print starting position
DC2 ! n Select print paper
DC2 # n Select print density
DC2 E Set the printing finished
DC2 T Test Printing
DC2 m s nL nH The length of mark position
DC2 * r n [d1…dn] Set bit image
DC2 V nL nH Set MSB bit image
DC2 v nL nH Set LSB bit image
FS C n Select code system