Operation Manual

DELETE—Touch [DELETE] to re-
move the current prole. A conrmation
overlay is displayed. Touch [CANCEL] to
stop the process, or [YES] to conrm the
deletion. Touch [OK] to return to the main
Proles screen.
Cruise Control
The Cruise Control screen is
accessible by pressing Quick Ac-
cess Key. The screen displays the
following:
• actual speed and set speed
• active rider
• ballast and attitude adjustment
(trim and surf) tabs
• depth
From this main screen the following
screens are accessible by touching the eld
associated with it:
• active prole
• ballast
The set speed can be adjusted by tapping
the UP or DOWN arrows to the right of
the Set Speed eld. In addition, the Cruise
Control can be turned ON and OFF by
touching the [CRUISE ON/OFF] button
at the center top or in the lower left corner
of the page.
Function and Description
Touch to turn Cruise Control ON or
OFF.
Touch to turn the Autolaunch ON or
OFF. When Autolaunch is ON, it automati-
cally controls the center tab. When speed
is above the Autolaunch speed, the center
tab will be retracted to zero percent (0%).
Or if a prole is selected, it deploys the
center tab to the prole setting. If the speed
is above the Autolaunch speed and then
decelerated below the Autolaunch speed,
the tab deploys to one-hundred percent
(100%).
Touch to save the settings to the current
Page 3-24 2014 MasterCraft Owners Manual • Gauges & Video Screens
G A U G E S & V I D E O S C R E E N S