Operation Manual

cally controls the center tab. When speed
is above the Autolaunch speed, the center
tab will be retracted to zero percent (0%).
Or if a prole is selected, it deploys the
center tab to the prole setting. If the speed
is above the Autolaunch speed and then
decelerated below the Autolaunch speed,
the tab deploys to one-hundred percent
(100%).
Touch to save the settings to the current
rider prole.
NOTE: If no rider prole is selected,
nothing will occur or change.
Touch to save these settings to a new rid-
er prole. A keyboard is displayed to name
the new prole and the new prole process
is launched. (See Proles in this section
of the Owner’s Manual for more informa-
tion.)
Touch to ll all ballast tanks.
Touch to empty all ballast tanks.
Gauges
The Gauges screen is accessi-
ble by pressing the Quick Access
Key.
This screen shows the speedometer,
air temperature, water temperature, bat-
tery voltage, water depth and engine hours
information. The Cruise Control can be
turned ON or OFF from this screen by
touching [CRUISE].
Video
The Video screen is accessible
by pressing the Quick Access Key.
There is access to three (3) video
sources provided on the screen:
• tower
• aux video
• media
Touch the source for the desired video
to be displayed. Cruise Control can also be
turned ON or OFF by touching [CRUISE]
while on this screen.
Gauges & Video Screens • 2014 MasterCraft Owners Manual Page 3-19
G A U G E S & V I D E O S C R E E N S