Operation Manual

Gauges & Video Screens • 2014 MasterCraft Owners Manual Page 3-49
G A U G E S & V I D E O S C R E E N S
Utilities
System Information
The System Settings screen displays the
current software version loaded on the unit.
It is typically only accessed when the unit
is rst installed in order to congure the
unit. You can set individual settings for
the available options, or choose to select
[RESTORE DEFAULTS] for the factory
settings.
Ballast Settings
Use the [NEXT] and [PREVIOUS] soft
keys to navigate the settings. Use the Save
soft key to save the modied settings.
Troubleshooting
Issue:
Display appears to not work or
doesn’t come ON.
Possible Remedies:
• Display could be in SLEEP mode. Touch
a key on the keypad to activate the dis-
play.
• Check for loose connections at battery
and display unit.
• Check for reversed polarity on the pow-
er connections, if connected to shore
power.
• Verify battery has a minimum voltage of
6.0 volts.
Issue:
Display resets or goes OFF when
starting engine.
Possible Remedies:
• Check display supply wires are connect-
ed properly to battery.
• Verify the battery is charged properly.
• Check battery for efcient starter cur-
rent.
Issue:
Display has no backlight.
Possible Remedy:
• Contact an authorized MasterCraft
dealer.
Issue:
Display has no keypad backlight.
Possible Remedy:
• Contact an authorized MasterCraft
dealer.