Specifications

paired or replaced prior to towing. When the coupling is placed on the
ball, the latch should close rmly. Keep the latch mechanism lightly oiled
and clean. Always install a lock pin in the coupler to promote safety.
Make certain that all the trailer lights are in proper working order,
to reduce the risk of serious injury, death and/or property damage.
Lights
The MasterCraft trailer harness was specifically designed to
mate with O.E.M. automotive equipment. This harness is designed
to disengage the trailer brakes with the use of the tow vehicle’s
O.E.M. harness.
Note: See your local dealer if your tow vehicle does not have the cor-
rect trailer harness.
Here are a few things you can do to keep your trailer lighting system
in good working order:
lights
• Be sure the white ground wire
is properly connected to the
trailer frame. Replace any
parts that are damaged or
worn.
• A small amount of waterproof
grease on the plug contacts
and light bulb bases will help
prevent rust and corrosion.
• Before every trip, check for
burned-out or broken bulbs,
cracked or broken light lens-
es, etc.
MasterCraft Trailers - Page 13