Specifications

If the coupler becomes damaged it must be repaired or replaced prior to tow-

ing. When the coupling is placed on the ball, the latch should close ﬁrmly. Keep

the latch mechanism lightly oiled and clean. Always install a lock pin in the cou-

pler to help ensure that the coupling does not become disengaged.

Before each use make certain that all trailer lights are in proper working order, to

reduce the risk of serious injury, death and/or property damage.

Lights

e MasterCraft trailer har-

ness was speciﬁcally designed

to mate with O.E.M. automo-

tive equipment. is harness

is designed to disengage the

trailer brakes with the use of

the tow vehicle’s O.E.M. har-

ness.

Note: See an authorized

MasterCraft dealer if the tow

vehicle does not have the cor-

rect trailer harness.

Here are a few good things

to do to keep the trailer light-

ing system in good working or-

der:

• Be sure the white ground

wire is properly connected

to the trailer frame. Replace

any parts that are damaged

or worn.

• A small amount of water-

proof grease on the plug

contacts and light bulb bases

will help prevent rust and corrosion.

• Before every trip, check for burned out or broken bulbs, cracked or broken

light lenses, etc.

MasterCraft Trailer Manual • Page 13