O colonial elegance HOW TO INSTALL YOUR STAIR PARTS UNIVERSAL BALUSTER URBAN AND FORGE COLLECTION IMPORTANT PLEASE READ ALL INSTRUCTIONS BEFORE YOU BEGIN INSTALLATION. + These instructions are for a square metal baluster. » Refer to your local building code for current regulations. == DECORATIVE SHOE o) BALUSTER SCREW (x4} Parts included Recommended tools 1. Baluster installation Mark the location of each baluster at an equal distance from one Drill 11/16° pilot holes at sate mark, 1" esp.
each baluster location, measures the length between Trim each baluster from the top using a metal saw. the tread and the lows side of the handrail. Add 3/4” to the measurement for insertion. Insert sate baluster in the handrail hole. Make a half tum to make sure that adhesive is on all Using a revel make sure the balusters ars straight then faces of baluster. secures using screws.
Fill the trilled handrail holes half full with construction adhesive or epoxy. \. > Slide the decorative shews. To salinity, do not touch your railing for & period of 24 hours, After 24 hours, remove any protruding dry adhesive with 2 utility knife. Quebec, Canada H1B ST8 DO NOT RETURN TO RETAILER If you have any questions, please contact our customer service at: or call toll free at: 1-800-361-2030 VISIT OUR WEB SITE com *4 year limited warranty Toni Free: 600.361.
