Owner's manual

_________________________________
Ref Parts Description Qty Part
No No
_________________________________
30 Chrome Push Handle 1 315524
31 11/2" Hose Barb 1 350664
32 Rear Gate Valve 1 434469
33 Gate Valve Gasket 3 307602
34 Holdown Clamps 3 358312
35
1
/ 4 - 20 X
3
/ 4 " Screw 2 431133
36 Spring Washer 2 374059
37 8" Wheels 2 369004
38 "X" Washer 2 368997
39 Hub Cap 2 319317
40
1
/ 4 - 20 X
1
/ 2 " Screw 10 360848
41 Handle Brackets 4 314080
42 Plastic Caster Sockets 2 371750
43 3" Swivel Casters 2 314056
44 Front Gate Valve Assy 1 318442
45 Gate Valve Guard 1 314064
46 Large Nut 1 306789
47 Inlet Connector 1 318809
48 20 Gallon Poly Tank 1 431036
49 Strainer Sack 1 308773
50 Inlet Deflector 1 434973
51 Grommet 1 435058
52 Plug 1 435260
53
1
/ 4 " Flat Washer 2 431214
54 Aluminum Spacer 2 306762
_________________________________
_________________________________
Ref Parts Description Qty Part
No No
_________________________________
11
1
/
2 " X 50 Ft Discharge Hose 1 344729
21
1
/ 2 " X 15 Ft Vacuum Hose 1 344699
3 16" Squeegee Tool 1 414158
4 12" Gulper Tool 1 335371
5 5 Ft Double Bend Wand 1 363480
_________________________________
TANK ASSEMBLY
REPLACEMENT PARTS LIST
TOOLS, HOSES AND INSTALLATION
PAGE 7
Tool &
Hose
Installation
The hose and swivel connector are pre-
assembled at the factory.
1) Line up the slots in the swivel connec-
tor with the retaining rivets on the tank
inlet.
2) Insert swivel connector and twist
clockwise until rivets reset against slot
end.
3) Slide free end of hose onto the
grooved end of the hose.
4) To attach tool to wand, turn wand nut
counterclockwise approximately four
complete turns.
5) Insert the tool into wand and cou-
pling. While holding the tool in place,
turn nut clockwise until wand nut is fully
locked.
Replacement Parts List