SDS

SECTION IV - FIRST AID MEASURES
Skin contact The product is innocuous and isn’t harmful to persons. In case of any allergy, ask a doctor.
Eye contact The product is innocuous and isn’t harmful to persons. In case of any allergy, ask a doctor.
Inhalation
N/A under normal usage conditions. Get away from the area with dust. In case of any problem,
the best thing to do is changing to fresh air.
Ingestion N/A under normal usage conditions.
SECTION V - FIRE FIGHTING MEASURES
Inammable or combustible It is not inammable. It is combustible in case of direct contact with ames.
Inammation point (° C) N/A
Inammation limit (max.) (° C) N/A
Inammation limit (min.) (° C) N/A
Self-ignition temperature (° C)
Not available. This temperature depends on moulding’s exposure time to the heat source,
and other parameters.
Inammability classication Class C
Inammability conditions Open re (direct contact with ames).
Procedures against re Mouldings close to FIRE should be wet by spraying water on them.
Extinction method Water in spray form.
Combustion products CO, CO
2
, NO, NO
2
.
Exposure limits N/A
Sudden unexpected re
and explosion risks.
The wood products does not constitute an explosion risk.
SECTION VI - ACCIDENTAL RELEASE MEASURES
Generally, prepainted Mouldings are not classied as hazardous substances.
SECTION VII - HANDLING AND STORING
Requirements for handling
and storing
The Mouldings are wooden products, and therefore may be stored in good ventilated areas,
away from heat sources, ames or sparks.
Material may be stored in a dry place before it’s used.
SECTION VIII - PREVENTION MEASURES / PERSONAL PROTECTION
Gloves We recommend the use of gloves for hand protection when handling this material.
Shoes Nothing special is required.
Eye protectors Does not require anything special.
Respirator Does not require anything special.
Working clothes Does not require anything special.
Others Does not require anything special.
www.arauco.cl
PAGE
03 of 05
VERSION
05
Material Safety Data Sheet
PREPAINTED MDF
MOULDING
Reference:HDSMouldings
Date :06.13.2006
Section :MTSA
QUALITY CONTROL DEPT.