Parts List Warranty NOTE: If any parts are missing or damaged, or if you have any questions, please call our toll-free helpline at 1-800-689-9928. ] L This manual domains important safety and operating instructions.
SAFETY GUIDELINES This manual contains Information that relates to PROTECTING PERSONAL SAFETY and PREVENTING EQUIPMENT PROBLEMS. It is very important to read this manual carefully and understand it thoroughly before using the product. The symbols listed below are used to indicate this information. CAUTION! Potential hazard that may result in moderate injury or damage to equipment. » Tha locks should be positioned on a level surface. « This locker is intended for indoor use only.
PARTS LIST PARTS LIST A Lot Anal #2-A Right Panel 43 Top Panel #4 Bottom Panel A LeR Sk Upper Panel #2-A Right Side Upper Panel #-A2 Left Side Bottom Panel #2-A Right SIDS Bottom Panel #5 Midi Shelf # Middle Layer Panel i {prep Back Panel #10 Bottom Back Panel #14-4 Small Dot #14-B Large Door #13 Kiddie Shelf Bracket # Lock Plate #12 Kiddie Panel Bracket hn7 Middles Comer Protection 415 Lome Protection A #6 Comer Protection ¥27B #27 #55 #55-A #50 #62 45 Screwdriver Koy Magnet Screw Maxima 8l Screw N (W4 x 1
Assembly Preparation * Assemble the storage cabinet on a clean, level surface. « Remove all items from the packaging box and ensure that all parts listed on pages 4 and 5 are included. « When installing parts that have more than one screw, tighten all screws by hand before tightening them with the screwdriver. TiP A magnetic screwdriver Is Included for your convenience. If a power screwdriver Is used, keep ona low torque setting. WARNING Some parts may have sharp edges.
2. Install Right Side Panel (Part 2-A) Repeat Step 1. Place Right Side Upper Panel (Part 2-A1), Right Side Bottom Panel (Part 2-A) together, line up screw holes, and use 3 pes af Screw G (Part 42) 1o tighten from tha side (fig B). Note: Before tightening screws, mask sure the comers and the face of the Right Side Panel (Part 2-A) are completely flush. 3.
ASSEMBLY INSTRUCTIONS 5. Install Middle Layer Panel (Part 7) 1) Attach the Middles Layer Panel (Part 7) as the left picture shows. Use 8 pcs of Screw F (Part 41) to fasten the Middle Layer Panel to the Left and Right Panels (Part 1-A and Part 2-A). NOTE: Marks sure that the middle layer panel brackets is level when securing in place. 2) Removal the middle Screw G (Part 42) which attaches the upper and bottom side panels in Steps 1 and 2.
ToP I 7. Install Leveling Feet (Part 6). Install Leveling Fest (Part 8) into the largest comer hales of the Bottom Panel (Part 4), and use Wrench (Part 25} to tights {fig G). 8. Install Middle Sahel (Part 5) Insert a Kiddie Shelf (Part 5) into the slots on the Side Panels. Use 6 pcs Screw F (Part 41) to fasten the Middle Shelf Bracket (Part 13) to the front of the side panels (fig H).
ASSEMBLY INSTRUCTIONS 9. Install Corner Protections (Part 15, Part 16 and Part 17) 1). Attach Comer Protection A, B (Part 15, Part 16) tort top and bottom of the cabinet, and use 20 pes Screw N (Part 54) to tighten. 2). Attach (Part 17) Middle Comer Protection to the middle of (Part 1-A) Left Side Panel and (Part 2-A) Right Side Panel, and use 8 pcs Screw N (Part 54) to tighten {fig 10.
1. 12. Install Magnet (Part 23) Place Magnet (Part 23) onto the top and bottom of each panel (the black plate should be facing the front), and use total 12 pes Screw F (Part 41) to tighten the magnets (fig X). Install Door (Part 14-A) (Part 14-B) 1) Attach the Small Door (Part 14-A) to the Right Side Panel, and use 3 pes Screw F (Part 41) to tighten. 2) Attach the Large Door (Part 14-B) fo the Right Side Panel, and use 5 pes Screw F (Part 41} to tighten {fig L ).
ASSEMBLY INSTRUCTIONS fig M 13. Install Mounting Strap (Part 60) ‘% A Remove 1 pc Screw F (Part 41) from the back comer protection. Attach the Mounting Strap {Part 60) to the back ] @ Dormer Protection brackets as the left photo shows using Screw O (Part 61) and Washer (Part 27). / C. Drill a hole In the wall with a 5/16" drill bit, and [ Insert the Wall Anchor (Part 55-4) Into the hole. @J é D.
This Master craft product is guaranteed for a period of one {1) year from the date of original retail purchase, against defaces In materials and workmanship. Subject to the conditions and limitations described below, this product, if resumed to us with proof of purchase within the stated warranty period and if covered under this warranty, will be repaired or replaced (with the same model, or one of equal value or specification), at our option.
